Part Number Hot Search : 
TC74LCX TA8751 B40NE TP6KE15A TA8751 110CA DH4330 SII50N12
Product Description
Full Text Search
 

To Download TT106N Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data Sheet
TT106N
TT106N Kenndaten TD106N..K..-A TD106N TD106N..K..-K DT106N
Elektrische Eigenschaften / Electrical properties Hochstzulassige Werte / Maximum rated values Periodische Vorwarts- und Ruckwarts-Spitzensperrspannung Tvj = -40C... Tvj max repetitive peak forward off-state and reverse voltages Vorwarts-Stospitzensperrspannung non-repetitive peak forward off-state voltage Ruckwarts-Stospitzensperrspannung non-repetitive peak reverse voltage Durchlastrom-Grenzeffektivwert maximum RMS on-state current Dauergrenzstrom average on-state current Stostrom-Grenzwert surge current Grenzlastintegral It-value Kritische Stromsteilheit critical rate of rise of on-state current Kritische Spannungssteilheit critical rate of rise of off-state voltage TC = 85C TC = 78C Tvj = 25 C, tP = 10 ms Tvj = Tvj max, tP = 10 ms Tvj = 25 C, tP = 10 ms Tvj = Tvj max, tP = 10 ms DIN IEC 747-6 f = 50 Hz, iGM = 0,6A, diG/dt = 0,6A/s Tvj = Tvj max, vD = 0,67 VDRM 6.Kennbuchstabe / 6th letter F Tvj = -40C... Tvj max Tvj = +25C... Tvj max
Elektrische Eigenschaften
VDRM,VRRM 1200 1600 VDSM VRSM ITRMSM ITAVM ITSM It (diT/dt)cr (dvD/dt)cr 1200 1600 1300 1700
1400 V 1800 V 1400 V 1800 V 1500 V 1900 V 180 A 106 A 115 A 2250 A 2000 A 25300 As 20000 As 150 A/s
1000 V/s
Charakteristische Werte / Characteristic values Durchlaspannung on-state voltage Schleusenspannung threshold voltage Ersatzwiderstand slope resistance Zundstrom gate trigger current Zundspannung gate trigger voltage Nicht zundender Steuerstrom gate non-trigger current Nicht zundende Steuerspannung gate non-trigger voltage Haltestrom holding current Einraststrom latching current Vorwarts- und Ruckwarts-Sperrstrom forward off-state and reverse current Zundverzug gate controlled delay time prepared by: C.Drilling approved by: J. Novotny
Tvj = Tvj max , iT = 300 A Tvj = Tvj max Tvj = Tvj max Tvj = 25C, vD = 6 V Tvj = 25C, vD = 6 V Tvj = Tvj max , vD = 6 V Tvj = Tvj max , vD = 0,5 VDRM Tvj = Tvj max , vD = 0,5 VDRM Tvj = 25C, vD = 6 V, RA = 5 Tvj = 25C, vD = 6 V, RGK 10 iGM = 0,6A, diG/dt = 0,6A/s, tg = 20 s Tvj = Tvj max vD = VDRM, vR = VRRM DIN IEC 747-6 Tvj = 25 C, iGM = 0,6A, diG/dt = 0,6A/s date of publication: Revision: 16.05.02 2
vT V(TO) rT IGT VGT IGD VGD IH IL
max.
1,78 V 0,9 V 2,6 m
max. max. max. max. max. max. max.
150 mA 1,4 V 5,0 mA 2,5 mA 0,2 V 200 mA 620 mA
iD, iR tgd
max. max.
30 mA 3 s
BIP AC/ 16.05.2002 Drilling
Seite/page
1/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data Sheet
TT106N
Tvj = Tvj max, iTM = ITAVM vRM = 100 V, vDM = 0,67 VDRM dvD/dt = 20 V/s, -diT/dt = 10 A/s 5.Kennbuchstabe / 5th letter O RMS, f = 50 Hz, t = 1 min RMS, f = 50 Hz, t = 1 sec tq
Elektrische Eigenschaften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutated turn-off time
typ. VISOL
150 s 3,0 kV 3,6 kV
Isolations-Prufspannung insulation test voltage
Thermische Eigenschaften / Thermal properties Innerer Warmewiderstand thermal resistance, junction to case
Thermische Eigenschaften Modul / per Module, = 180 sin pro
pro Zweig / per arm, = 180 sin pro Modul / per Module, DC pro Zweig / per arm, DC pro Modul / per Module pro Zweig / per arm
RthJC
max. max. max. max. max. max.
0,165 0,330 0,155 0,310
C/W C/W C/W C/W
Ubergangs-Warmewiderstand thermal resistance, case to heatsink Hochstzulassige Sperrschichttemperatur maximum junction temperature Betriebstemperatur operating temperature Lagertemperatur storage temperature Mechanische Eigenschaften / Mechanical properties Gehause, siehe Anlage case, see annex Si-Element mit Druckkontakt Si-pellet with pressure contact Innere Isolation internal insulation Anzugsdrehmoment fur mechanische Anschlusse mounting torque Anzugsdrehmoment fur elektrische Anschlusse terminal connection torque Steueranschlusse control terminals Gewicht weight Kriechstrecke creepage distance Schwingfestigkeit vibration resistance
RthCH Tvj max Tc op Tstg
0,04 C/W 0,08 C/W 140 C
-40...+140 C -40...+140 C
Mechanische Eigenschaften
Seite 3 Page 3
AlN Toleranz / Tolerance 15% Toleranz / Tolerance 10% DIN 46 244 G M1 M2 4 4 A 2,8 x 0,8 typ. 250 g 15 mm f = 50 Hz file-No. 50 m/s E 83336 Nm Nm
Mit diesem Datenblatt werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Es gilt in Verbindung mit den zugehorigen technischen Erlauterungen. This data sheet specifies semiconductor devices, but promises no characteristics. It is valid in combination with the belonging technical notes.
BIP AC/ 16.05.2002 Drilling
Seite/page
2/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data Sheet
TT106N
Mabild Mabild Mabild
1
2
54
3
76
1
2
54
3
1
2
76
3
TT
1 2
45
TD
3 1 2
54
DT
3
TD-K
TD-A
BIP AC/ 16.05.2002 Drilling
Seite/page
3/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data Sheet
TT106N
R,T - Werte Di R,T-Werte
Analytische Elemente des transienten Warmewiderstandes Z thJC fur DC Analytical elements of transient thermal impedance Z thJC for DC 1 0,0127 0,001 2 0,03 0,0092 3 0,049 0,074 4 0,1682 0,57 5 0,0315 3,51
n max
Pos. n Rthn [C/W] n [s]
6
7
Analytische Funktion / Analytical function:
Z thJC =
n=1
S
R thn 1 - e
-t
tn
Luftselbstkuhlung / Natural cooling 3 Module pro Kuhlkorper / 3 modules per heatsink Kuhlkorper / Heatsink type: KM14 (50W) Analytische Elemente des transienten Warmewiderstandes Z thCA Analytical elements of transient thermal impedance Z thCA Pos. n Rthn [C/W] n [s] 1 0,048 3,71 2 0,202 40 3 2,05 984 4 5 6 7
Verstarkte Kuhlung / Forced cooling 3 Module pro Kuhlkorper / 3 modules per heatsink Kuhlkorper / Heatsink type: KM 14 (Papst 4650N) Analytische Elemente des transienten Warmewiderstandes Z thCA Analytical elements of transient thermal impedance Z thCA Pos. n Rthn [C/W] n [s] 1 0,048 3,71 2 0,202 40 3 0,53 254 4 5 6 7
nmax
Analytische Funktion / Analytical function:
Z thCA =
n=1
S
Rthn 1 - e
-t
tn
BIP AC/ 16.05.2002 Drilling
Seite/page
4/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data Sheet
TT106N
= 30 60 90 120 180
0,400
Diagramme
Trans. Warmewiderstand bei Sinus
0
Z(th)JC [C/W]
0,300
0
180
0,200
0,100
0,000 0,01
0,1
1
t [s]
10
100
Transienter innerer Warmewiderstand je Zweig / Transient thermal impedance per arm ZthJC = f(t) Sinusformiger Strom / Sinusoidal current Parameter: Stromfluwinkel / Current conduction angle
Trans. Warmewiderstand bei Rechteck
0,500
= 30
0,400
0
60
0
180
Z(th)JC [C/W]
0,300
90 120 180 DC
0,200
0,100
0,000 0,001
0,01
0,1
t [s]
1
10
100
Transienter innerer Warmewiderstand je Zweig / Transient thermal impedance per arm ZthJC = f(t) Rechteckformiger Strom / Rectangular current Parameter: Stromfluwinkel / Current conduction angle
BIP AC/ 16.05.2002 Drilling
Seite/page
5/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module 200
Diagramme
Datenblatt / Data Sheet
TT106N
180
Durchgangsverluste bei Sinus
150 PTAV [W]
0
120
0
180
90 60 Q = 30
100
50
0 0 20 40 60 ITAV [A] 80 100 120
Durchlassverlustleistung je Zweig / On-state power loss per arm PTAV = f(ITAV) Sinusformiger Strom / Sinusoidal current Strombelastung je Zweig / Current load per arm
Parameter: Stromfluwinkel / Current conduction angle
300
Durchgangsverluste bei Rechteck
DC
0
0
180
180 60 90 120
200 PTAV [W]
Q = 30 100
0 0 50 100 ITAV [A] 150 200
Durchlassverlustleistung je Zweig / On-state power loss per arm PTAV = f(ITAV) Rechteckformiger Strom / Rectangular current Strombelastung je Zweig / Current load per arm
Parameter: Stromfluwinkel / Current conduction angle
BIP AC/ 16.05.2002 Drilling
Seite/page
6/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data Sheet
TT106N
140 120 TC [C] 100 80 60 40 20 0 20
Gehausetemperatur bei Sinus
0
0
180
Q = 30
60
90
120
180
40
60
ITAVM [A]
80
100
120
Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Sinusformiger Strom / Sinusoidal current Strombelastung je Zweig / Current load per arm
Parameter: Stromfluwinkel / Current conduction angle
Gehausetemperatur bei Rechteck
140 120 100 TC [C] 80 60 40 20 0 50 100 ITAVM [A] 150 200
0
0
180
Q = 30
60
90
120
180
DC
Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Rechteckformiger Strom / Rectangular current Strombelastung je Zweig / Current load per arm
Parameter: Stromfluwinkel / Current conduction angle
BIP AC/ 16.05.2002 Drilling
Seite/page
7/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
800 0,06 0,08 P tot [W] 600 0,10 0,12 0,15 400 0,20 0,25 0,30 200 0,60 0,40 0,80 0,12 0 20 40 60 T A [C] 80 0,04
Datenblatt / Data Sheet
TT106N
B2
ID
RthCA [C/W]
Maximaler Strom bei B2 und B6
+ ~
R-Last R-load L-Last L-load
-
100
120
140
0
100 I D [A]
200
300
Hochstzulassiger Ausgangsstrom / Maximum rated output current ID B2- Zweipuls-Bruckenschaltung / Two-pulse bridge circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehausen und Umgebung / Thermal resistance cases to ambient RthCA
1000
0,05 0,06
0,04
R thCA [C/W]
B6
ID
+ 3~
800
0,08
0,10 600 0,12 0,15 400 0,20 0,25 0,30 200 0,40 0,60 0,80 1,00 15 35 55 75 95 115 135 0 50 100 150 ID [A] 200 250 300
0 T A [C]
Hochstzulassiger Ausgangsstrom / Maximum rated output current ID B6- Sechspuls-Bruckenschaltung / Six-pulse bridge circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehausen und Umgebung / Thermal resistance cases to ambient RthCA
BIP AC/ 16.05.2002 Drilling
Seite/page
8/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
400 0,10 0,15 300 0,20 0,25 P tot [W] 0,30 200 0,35 0,40 0,50 0,70 100 1,00 1,50 2,00 0 10 30 50 TA [C] 70
Datenblatt / Data Sheet
TT106N
W 1C ~
IRMS
Maximaler Strom bei W1C und W3C
~
R thCA [C/W]
90
110
130
0
50
100
I RMS [A]
150
200
250
300
Hochstzulassiger Effektivstrom / Maximum rated RMS current IRMS W1C - Einphasen-Wechselwegschaltung / Single-phase inverse parallel circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehause und Umgebung / Thermal resistance case to ambient RthCA
1000 0,08 0,06 0,04 R thCA [C/W]
~
W 3C ~
~
IRMS
800
0,10 0,12
600
0,15 0,20
~
~
~
400
0,25 0,30 0,40 0,60 0,80 1,00
200
0 15 35 55 T A [C] 75 95 115 135 0 50 100 I RMS [A] 150 200 250
Hochstzulassiger Effektivstrom / Maximum rated RMS current IRMS W3C - Dreiphasen-Wechselwegschaltung / Three-phase inverse parallel circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehausen und Umgebung / Thermal resistance cases to ambient RthCA
BIP AC/ 16.05.2002 Drilling
Seite/page
9/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module 100
Datenblatt / Data Sheet
TT106N Steuercharakteristik
10
d
vG [V]
a
Tvj = -40 C
b
c
0,1 1 10 100 iG [mA] 1000 10000 100000
Steuercharakteristik vG = f (iG) mit Zundbereichen fur VD = 6 V Gate characteristic vG = f (iG) with triggering area for VD = 6 V Hochstzulassige Spitzensteuerverlustleistung / Maximum rated peak gate power dissipation PGM = f (tg) : a - 40 W/10ms b - 80 W/1ms
Tvj max = +140C
1
Tvj = +25C
1000
Zundverzug
c - 100 W/0,5ms d - 150W/0,1ms
100 tgd [s] 10 a 1 b 0,1 10 100 iGM [mA] 1000 10000
Zundverzug / Gate controlled delay time tgd = f(iG) Tvj = 25C, diG/dt = iGM/1s a - maximaler Verlauf / Limiting characteristic b - typischer Verlauf / Typical characteristic
BIP AC/ 16.05.2002 Drilling
Seite/page
10/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
10000
Datenblatt / Data Sheet
TT106N Sperrverzogerungsladung
Qr [As]
1000
iTM = 500A 200A 100A 50A 20A
100 1 10 -di/dt [A/s] 100
Sperrverzogerungsladung / Recovered charge Qr = f(-di/dt) Tvj = Tvjmax, vR 0,5 VRRM, vRM = 0,8 VRRM Parameter: Durchlastrom / On-state current iTM
1.600 IT(OV)M [A] 1.400 1.200 1.000 800 b
Grenzstrom
a TA = 35 C
TA = 45 C 600 400 200 0 0,01
0,1
t [s]
1
Grenzstrom / Maximum overload on-state current IT(OV)M = f(t), vRM = 0,8 VRRM Leerlauf / No-load conditions a: TA = 35C, verstarkte Luftkuhlung / Forced air cooling b: TA = 45C, Luftselbstkuhlung / Natural air cooling
BIP AC/ 16.05.2002 Drilling
Seite/page
11/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
1.200 1.000 800 IT(OV) [A] 600 400 200 0 0,01
Datenblatt / Data Sheet
TT106N Uberstrom
I TAV (vor) = 0A 10 A 15 A 20 A 25 A 30 A
0,1
1
t [s] 10
100
1000
10000
Uberstrom je Zweig / Overload on-state current IT(OV) B6- Sechspuls-Bruckenschaltung, 120 Rechteck / Six-pulse bridge circuit, 120 rectangular Kuhlkorper / Heatsink type KM14 (50W) Luftselbstkuhlung bei / Natural cooling at TA = 45C Parameter: Vorlaststrom je Zweig / Pre-load current per arm ITAV(vor)
1.200 1.000 800 IT(OV) [A] 600 400 200 0 0,01
I TAV (vor) = 0A 20 A 30 A 40 A 50 A 60 A
0,1
1
t [s]
10
100
1000
10000
Uberstrom je Zweig / Overload on-state current IT(OV) B6- Sechspuls-Bruckenschaltung, 120 Rechteck / Six-pulse bridge circuit, 120 rectangular Kuhlkorper / Heatsink type KM 14 (Papst 4650N) Verstarkte Kuhlung bei / Forced cooling at TA = 35C
Parameter: Vorlaststrom je Zweig / Pre-load current per arm ITAV(vor)
BIP AC/ 16.05.2002 Drilling
Seite/page
12/12
Terms & Conditions of Usage
Attention The present product data is exclusively subscribed to technically experienced staff. This Data Sheet is describing the specification of the products for which a warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its specifications. Changes to the Data Sheet are reserved. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. Should you require product information in excess of the data given in the Data Sheet, please contact your local Sales Office via "www.eupec.com / sales & contact". Warning Due to technical requirements the products may contain dangerous substances. For information on the types in question please contact your local Sales Office via "www.eupec.com / sales & contact".


▲Up To Search▲   

 
Price & Availability of TT106N

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X